Winegard Satellite TV System PM 2000 User Manual

WINEGARD®  
TM  
Carryout  
Portable Digital Satellite Antenna  
Model PM-2000  
Assembly and Operating Instructions  
Made in USA  
Printed in U.S.A. Winegard Company • 3000 Kirkwood Street • Burlington, Iowa 52601-2000  
© Winegard Company, 2002, 2006  
2451147 Rev2, 11/10  
 
INSTRUCTIONS FOR STORAGE  
STEP 1. Disconnect 20’ coaxial cable from receiver.  
WINEGARD MOBILE PRODUCTS LIMITED WARRANTY  
(2 YEARS PARTS; 1 YEAR LABOR)  
STEP 2. Remove LNBF/feed tube assembly from dish  
bracket assembly.  
Winegard Company warrants this product against defects in  
materials or workmanship for a period of two (2) years from the date  
of original purchase. During year one (1) of such warranty, Winegard  
Company will also pay authorized labor costs to an authorized Winegard  
dealer to repair or replace defective products. No warranty claim will  
be honored unless at the time the claim is made, Customer presents  
proof of purchase to an authorized Winegard dealer (to locate the  
nearest authorized Winegard dealer, contact Winegard Company, 3000  
Kirkwood Street, Burlington, Iowa 52601, Telephone 800-288-8094 or  
with a dated sales receipt for the Winegard product to verify the  
product is under warranty. If the date of purchase cannot be verified,  
the warranty period shall be considered to begin thirty (30) days after  
the date of manufacture.  
STEP 3. Store LNBF/feed tube assembly on top of dish  
bracket assembly, with LNBF facing downward. Tighten  
locking knob. See Figure 6.  
LNBF FEED  
TUBEASSEMBLY  
LOCKING KNOB  
FIGURE 6  
If a defect in material or workmanship is discovered, Customer may  
take the product to an authorized Winegard dealer for service. Customer  
must provide proof of purchase to verify the product is under warranty.  
If the product is brought to an authorized Winegard dealer for service  
prior to expiration of year one (1) of the warranty period and a defect  
in material or workmanship is verified by Winegard Technical Services,  
Winegard Company will cover the Winegard dealer’s labor charges for  
warranty service. The Winegard dealer must contact Winegard Technical  
Services in advance for pre-approval of the service. Approval of the  
service is at the sole discretion of Winegard Company.  
Alternatively, Customer may ship the product prepaid to Winegard  
Technical Services (located at 3111 Kirkwood Street, Burlington, Iowa  
52601, Telephone 800-788-4417). Customer must return the product  
along with a brief description of the problem and provide Winegard  
Technical Services with Customer’s name, address, and phone  
number. Customer must also provide proof of purchase to verify  
the product is under warranty. If the product is returned before the  
expiration of the warranty period, Winegard Company will (at its  
option) either repair or replace the product.  
This Limited Warranty does not apply if the product has been  
damaged, deteriorates, malfunctions or fails from: improper  
installation, misuse, abuse, neglect, accident, tampering, modifica-  
tion of the product as originally manufactured by Winegard in any  
manner whatsoever, removing or defacing any serial number, usage  
not in accordance with product instructions or acts of nature such  
as damage caused by wind, lightning, ice or corrosive environments  
such as salt spray and acid rain. This Limited Warranty also does  
not apply if the product becomes unable to perform its’ intended  
function in any way as a result of the television signal provider  
making any changes in technology or service.  
STEP 4. Remove clevis pin and hair spring cotter from  
legs and loosen elevation locking knob.  
STEP 5. Swing legs underneath reflector and tip forward.  
Insert clevis pin back into original hole and secure with  
hair spring cotter. Tighten elevation locking knob.  
RETURN AUTHORIZATION POLICY  
If you require a replacement part, call Winegard Company  
at 1-800-288-8094 between the hours of 8:00 a.m. and  
4:00 p.m. central time, Monday through Friday. Credit card  
holders only. If you need technical support, call 1-800-  
788-4417.  
A Return Material Authorization (RMA) is required prior to returning  
any product to Winegard Company or Winegard Warranty Services  
under this warranty policy. Please call our Technical Services  
Department at 800-788-4417 or send an e-mail to  
[email protected] to obtain the RMA number. Please furnish  
the date of purchase when requesting an RMA number. Enclose the  
product in a prepaid package and write the RMA number in large,  
clear letters on the outside of the package. To avoid confusion or  
misunderstanding, a shipment(s) without an RMA number(s) or an  
unauthorized return(s) will be refused and returned to Customer  
freight collect.  
WINEGARD COMPANY DOES NOT ASSUME ANY LIABILITIES  
FOR ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, MADE  
BY ANY OTHER PERSON.  
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR  
STATUTORY INCLUDING WARRANTIES OF FITNESS FOR A  
PARTICULAR PURPOSE AND MERCHANTABILITY ARE LIMITED  
TO THE TWO YEAR PERIOD OF THIS WARRANTY.  
In states that do not allow limitations on implied warranties, or the  
exclusion of limitation of incidental or consequential damages, the  
above limitations or exclusions do not apply.  
INSTRUCTIONS FOR RECEIVING A SIGNAL  
STEP 1. After assembling the antenna, make sure it is  
resting on a flat level surface.  
STEP 2. Determine the azimuth (direction) and elevation  
angle (up/down) by entering your zip code into the appro-  
priate set-up menu on your receiver.  
STEP 3. To set the elevation angle (up/down), loosen the  
knob on the “elevation bolt” and elevate the “dish bracket”  
to the correct angle shown on the menu screen, by lining  
up the colored edge on the clamp with the degree mark-  
ing.  
Some states do not allow limitations on how long an implied  
warranty lasts, or the exclusion of limitation of incidental or  
consequential damages, so the above limitations or exclusions may  
not apply to you.  
This warranty gives Customer specific legal rights. Customer may  
also have other rights that may vary from state to state.  
STEP 4. Using a compass, rotate the base slowly until  
the center of the dish faces the desired azimuth angle  
(direction) shown on the menu screen. The signal is digi-  
tal; you must wait a few seconds after each move to  
allow the receiver to process the signal.  
SATELLITE RECEIVER WARRANTY  
See manufacturer’s limited warranty policy.  
WS-MOBWARREV2  
Rev. 1/10  
STEP5.Adjust azimuth (direction) and elevation (up/down)  
for strongest signal.  
 
WINEGARD®  
Printed in U.S.A. Winegard Company • 3000 Kirkwood Street • Burlington, Iowa 52601-2000  
© Winegard Company, 2002, 2006  
2451147  
Rev2, 11/10  
 

Westinghouse Vacuum Cleaner WST1500 1509 User Manual
Whirlpool Trash Compactor TF4600X User Manual
White Rodgers Smoke Alarm 956 User Manual
Wind Crest Ventilation Hood WFA360SCG User Manual
Woods Equipment TV Mount 2300003 User Manual
Xerox All in One Printer 3635MFP User Manual
Xerox Copier 9200 II User Manual
Zanussi Dishwasher ZDT 6894 User Manual
Zanussi Oven 237005 User Manual
Zanussi Oven FM 55 User Manual