90 DAY LIMITED WARRANTY
WinegardCompanywarrantsthisWinegardproductagainstanydefectsinmaterialsorworkmanship
within 90 (ninety) days from date of purchase. No warranty claim will be honored unless at the time
the claim is made, you present proof of purchase to an authorized Winegard dealer (if unknown,
please contact Winegard Company, 3000 Kirkwood Street, Burlington, IA 52601-2000, Telephone
800-288-8094).
WINEGARD®
SENSAR® TV ANTENNA
Amplified Model GS-2200
WinegardCompany(atitsoption)willeitherrepairorreplacethedefectiveproductatnochargetoyou.
This warranty covers parts, but does not cover any costs incurred in removal, shipping or reinstallation
oftheproduct.Thislimitedwarrantydoesnotapplyiftheproductisdamaged,deteriorates,malfunctions
or fails from: misuse, improper installation, abuse, neglect, accident, tampering, modification of the
product as originally manufactured by Winegard, usage not in accordance with product instructions
or acts of nature such as damage caused by wind, lightning, ice or corrosive environments such as
salt spray and acid rain.
Non-amplified Model GS-1100
Made in U.S.A.
U.S. Patent No. D500,496
The 90 Day Warranty is provided on the condition that the equipment is properly delivered with all
handling and freight charges prepaid to your Winegard dealer for return to our factory for repair or
replacement. Winegard dealers will arrange for the replacement or repair and return to you without
charge the product which failed due to defective material or workmanship.
WINEGARD COMPANY WILLNOTASSUMEANY LIABILITIES FORANY OTHER WARRANTIES,
EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE
LIMITED TO THE 90-DAY PERIOD OF THIS WARRANTY.
Pointing Antenna
*
The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort or
otherwise, and Winegard shall not be liable for incidental or consequential damage or commercial
loss, or from any other loss or damage except as set forth above.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of
limitation of incidental or consequential damages, so the above limitations or exclusions may not
apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from
Point the front of the antenna (with Winegard logo)
at broadcast towers of stations you want to receive.
*
state to state.
Rev. 2/08
HOW TO PROVIDE
Example of antenna grounding as per
National Electrical Code, ANSI/NFPA 70
LIGHTNING PROTECTION
FOR TV ANTENNA AND SET
Register your product at
winegard.com/myantenna
Step 1. Mount the lightning arrestor or 75
ohm coaxial grounding block as close as
possible to where the 75 ohm coaxial cable
downlead enters the house.
Antenna Lead
In Wire
WARNING: INSTALLATION OF ANTENNAS NEAR POWER
LINES IS DANGEROUS. FOR YOUR SAFETY, FOLLOW THE
INSTALLATION INSTRUCTIONS.
Step 2. The ground wires for both the mast
and the downlead should be copper or alu-
minum wire, number eight (8) or larger.
Ground
Clamp
Step 3. The downlead wire from the
antenna to the lightning arrestor and the
mast ground wire should be secured to the
house, spaced from four (4) to six (6) feet
apart.
Electric
Service
Equipment
Antenna
Discharge Unit
(NEC Section 810-20)
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE POWER SUPPLY TO RAIN OR MOISTURE.
(May substitute a 75 ohm
Coax Grounding Block)
Grounding Conductors
(NEC Section 810-21)
NOTE: In the case of a “ground up” an-
tenna installation, it may not be necessary
to ground the mast if the mast extends four
or more feet into the earth. Consult a TV
serviceman for the proper depth in your
location.
Ground
Clamps
NOTE: Any alteration or modification to product or any other use
of the parts other than their intended use, voids the warranty.
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
NEC - National Electrical Code
Printed in U.S.A. © 2004, 2006 Winegard Company Rev4 12-13 2451966
WINEGARD CO., 3000 KIRKWOOD STREET, BURLINGTON, IA 52601-2000
|