Shakespeare Electronic CPA 110 User Manual

Installing the Cell Phone Adapter

The Style CPA-110 Cell Phone Adapter lets you connect Motorola MicroTAC™,

MicroTAC™ II, PL 550/950, or Slim Lite phones to your boat’s cellular antenna.

Installation Instructions

1. Extend the cell phone’s retractable antenna as far as it will go.

2. Unsnap the antenna’s black base cap at its base with a thin

bladed screwdriver. See picture #1.

3. Pull the coil assembly out of its socket and slide it away from

the phone along the antenna.

4. Unscrew the antenna from the

phone by twisting it counter-

clockwise. See picture #2.

5. Snap the (supplied) black replacement

flexible antenna into place in the phone’s

antenna socket. The small metal connector

at its base should point toward the back of

the cell phone. See picture #3.

6. Snap the supplied replacement black cap into

position. See picture #4.

7. Connect the adapter cable to your ship’s antenna,

and plug the other end into the connection at the

base of the replacement antenna.

Supplied Parts

1 Antenna adapter cable

1 Replacement black cap

1 Replacement flex antenna

Shakespeare Electronic Products Group · Marine Products

6111 Shakespeare Rd., Columbia, SC 29223 · 803-227-1590 · Fax: 803-419-3099

· Form I-CPA-110 J: rev. 12-9-2006