Winegard Cell Phone Accessories TN 2055 User Manual

TravelNet Internet Only Cellular Router Activation Guide  
Activation Instructions For Models TN-2033, and TN-2055:  
Verizon TN-2055 Activation:  
1. Connect an Ethernet Cable directly to the TravelNet Cellular Router and the  
Laptop.  
2. Enable the Local Area Network, when connected, go to the next step.  
3. Open a web browser (Internet Explorer, Firefox, Mozilla, Safari)  
4. Enter the IP address: 192.168.1.10  
Figure 1  
Figure 2  
5. Enter the user name ‘ctek’ and password ‘ctek’  
6. Click on the Login button.  
7. Click on the Activation button.  
Ver. 1.5  
4/21/2009  
- 1 -  
19. Click on the Status-Wireless button, and verify that there is a Current IP address.  
This may take several minutes depending on the carrier network.  
Figure 5  
20. Click on the Home button.  
21. Click on the Restart button and confirm by clicking the Restart button again, and  
wait 30 seconds.  
22. Do a restart of all network devices in order, first the TravelNet Router, 2nd the  
Edimax Router, and finally laptop.  
Sprint TN-2033 Activation:  
1. Connect an Ethernet Cable directly to the TravelNet Cellular Router and the  
Laptop.  
2. Enable the Local Area Network, when connected, go to the next step.  
3. Open a web browser (Internet Explorer, Firefox, Chrome, Mozilla)  
4. Enter the IP address: 192.168.1.10  
Figure 6  
Ver. 1.5  
4/21/2009  
- 3 -  
Figure 7  
5. Enter the user name ‘ctek’ and password ‘ctek’  
6. Click the Log In button.  
7. Click on the Activation button.  
8. Click on the Over the Air Activation button  
Figure 8  
9. If Network Stability is Ok for Activation then go to step 10, if Not Ok, then wait 3  
minutes. If still Not Ok, call support.  
Figure 9  
Ver. 1.5  
4/21/2009  
- 4 -  
10. Click on the Activate button.  
11. Wait 3 minutes, then click the Status button. If still in progress, then wait an  
additional 3 minutes. If still in progress or ‘failed’, contact support.  
12. When status changes to ‘Activated’ click the Back button.  
13. Click on the Home button.  
14. Click on the Interfaces-Wireless button and change the Wireless connection type  
to ‘Enable’ (refer to fig. 10)  
Figure 10  
15. At the bottom of the page, click the Update button.  
16. Ok, then click the Home button.  
17. Click on the Restart button and confirm by clicking the Restart button again, and  
wait 30 seconds.  
Figure 11  
18. Click on the Home button.  
19. Click the Status-Wireless button, verify that there is a Current IP address.  
20. Click on the Home button.  
21. Click on the Restart button and confirm by clicking the Restart button again, and  
wait 30 seconds.  
22. Do a hard restart of all network devices in order, first the Cellular Router, 2nd the  
WiFi Router, and finally laptop.  
Ver. 1.5  
4/21/2009  
- 5 -  
Setting Up WiFi Security on the Edimax BR-6204WG  
Refer to the Edimax users guide CD for additional information.  
Once you have an internet connection and an unsecure WiFi connection  
established proceed to setup WiFi security for your Edimax router.  
Figure 12  
WEP Key Setup  
Figure 13  
1. Log into the Edimax WiFi Router at 192.168.2.1  
2. Enter the Username ‘admin’ and Password ‘1234’  
3. Go to WIRELESS SETTINGS > SECURITY  
4. Encryption type: select WEP  
5. Key Length: 64-bit  
6. Key Format: Hex (10 Characters)  
7. Default Tx Key: Key 1.  
8. Encryption Key 1: Enter your 10 Characters Key- see chart below  
9. Do not place an “x” in the selection box labeled “Enable 802.1x  
Authentication” for normal installations. If there are any questions call  
TravelNet Technical Support.  
Ver. 1.5  
4/21/2009  
- 6 -  
Figure 14  
WEP Key Setup  
Parameters Default Description  
Key Length 64-bit  
You can select the WEP key length for encryption, 64-bit  
or 128-bit. Larger WEP key length requires 26  
hexadecimal characters.  
Key Format  
Use hexadecimal digits (in the "A-F", "a-f" and "0-9"  
range) to be the WEP Key.  
Examples:  
Hexadecimal Digits: 12345abcde or abcdef0123  
10.Write key on piece of paper or on Edimax manual and keep in a safe  
place with other important documentation.  
11. Click on the Apply Button and wait for the System to automatically  
Restart. Click OK button and security setup is complete.  
12.Call TravelNet Technical Support (877) 475-7771 if there are questions  
concerning Apple Computers or if you prefer to use other encryption  
methods.  
To connect your XP computer to your wireless network  
Configuring the Windows XP Wireless Clients (With WEP)  
Configuration of the Windows XP wireless clients for WEP key authentication depends  
on whether you are using Windows XP with SP2 or Windows XP with SP1 and whether  
the wireless network adapter driver supports Wireless Auto Configuration.  
Ver. 1.5  
4/21/2009  
- 7 -  
Wireless Network Adapter Driver Supports Wireless Auto Configuration with  
Windows XP with SP2  
Use the following procedure to configure Windows XP with SP2 for your infrastructure  
mode wireless network when the wireless network adapter supports Wireless Auto  
Configuration:  
1. When the computer is within range of the wireless router or Access Point (AP)  
operating in your home or small business, Windows XP should detect it and  
prompt you with a Wireless networks detected message in the notification area  
of your taskbar.  
2. Click the notification message. If you are not notified, right-click the wireless  
network adapter in Network Connections, then click View Available Wireless  
Networks. In either case, you should see a Choose a wireless network dialog  
box with the name of your wireless network. (If the “TravelNet xxxx” wireless  
network is not displayed, it may be necessary to reset the unit by removing its  
power plug for 10 seconds, then reinsert the power plug and wait 45 to 60  
seconds). Then select the “View Available Wireless Networks” again.  
3. Double-click your wireless network name. Windows XP will attempt to connect  
to your wireless network.  
4. Because Windows XP has not been configured with the WEP key for your  
wireless network, the connection attempt will fail and Windows XP will prompt  
you with a Wireless Network Connection dialog box. Type the WEP key in  
Network key and Confirm network key, and then click Connect.  
5. If the status message for your wireless network in the Choose a wireless network  
dialog box is Connected, you are done. If the status message for your wireless  
network in the Choose a wireless network dialog box is Authentication did not  
succeed, click Change the order of preferred networks in the list of Related  
tasks. From the Wireless Networks tab of properties of your wireless network  
adapter, click the name of your wireless network in Preferred networks, and  
then click Properties.  
6. In Network Authentication, click WEP.  
7. In Network key, type the WEP key as configured on the wireless Access Point  
(AP). In Confirm network key, retype the WEP key.  
8. Click OK to save changes to the wireless network.  
9. Click OK to save changes to the wireless network adapt  
To connect your Windows Vista computer to your wireless network  
View and connect to available wireless networks  
Applies to all editions of Windows Vista.  
If you have a mobile PC, you can see a list of available wireless networks, and then  
connect to one of those networks, no matter where you are. The wireless networks appear  
Ver. 1.5  
4/21/2009  
- 8 -  
only if your computer has a wireless network adapter installed and the adapter is turned  
on.  
1.Open Connect to a Network by clicking the Start button , and then clicking  
Connect to.  
2.In the Show list, click Wireless.  
You'll see a list of the wireless networks currently available. If you do not see a network  
listing similar to this example: TravelNet 1234, it may be necessary to reset power on the  
WiFi router, wait 45 to 60 seconds and refresh the “View Available Wireless Networks”.  
3.Highlight your wireless network choice, then click Connect.  
If you don't see the network you want to connect to, click Set up a connection or  
network. A list of options will appear that includes manually searching for and connecting  
to a network, as well as creating a new network connection.  
Some networks require a network security key or passphrase. To connect to one of those  
networks, ask the network administrator or the service provider for the key or passphrase.  
Enter WEP encryption key in same manner as described on previous page for Windows XP  
Whenever possible, you should connect to security-enabled wireless networks. If you  
do connect to a network that is not secure, be aware that someone with the right tools  
can see everything that you do, including the websites you visit, the documents you  
work on, and the user names and passwords that you use.  
After you're connected, you can close the Wireless Network Connection  
window. Now you're ready to browse the Web wirelessly. You can also create a  
wireless network in your home, RV or boat that connects your computers,  
printers, cameras, games, and other accessories for easy access and enjoyment.  
QUESTIONS? CALL OUR SUPPORT LINE: 877-475-7771 or visit our  
TravelNet  
Winegard Company  
Ver. 1.5  
4/21/2009  
- 9 -  
Support: (877) 475-7771  
FAX: 847-991-3328  
FAX: 847-991-3328  
Ver. 1.5  
4/21/2009  
- 10 -  
For Winegard TravelNet Internet Only Models  
(TN-2033, TN-2055, TN-2099)  
WINEGARD MOBILE PRODUCTS LIMITED WARRANTY  
(2 YEARS PARTS)  
Winegard Company warrants this product against defects in materials or workmanship for a  
period of two (2) years from the date of original purchase. No warranty claim will be honored  
unless at the time the claim is made, Customer presents proof of purchase to an authorized  
Winegard dealer (to locate the nearest authorized Winegard dealer, contact Winegard Company,  
3000 Kirkwood Street, Burlington, Iowa 52601, Telephone 800-288-8094 or visit  
Winegard product to verify the product is under warranty. If the date of purchase cannot be  
verified, the warranty period shall be considered to begin thirty (30) days after the date of  
manufacture.  
If a defect in material or workmanship is discovered, Customer may take the product to an  
authorized Winegard dealer for service. Customer must provide proof of purchase to verify the  
product is under warranty.  
Alternatively, Customer may ship the product prepaid to Winegard Technical Services (located  
at 3111 Kirkwood Street, Burlington, Iowa 52601, Telephone 800-788-4417). Customer must  
return the product along with a brief description of the problem and provide Winegard Technical  
Services with Customer’s name, address, and phone number. Customer must also provide proof  
of purchase to verify the product is under warranty. If the product is returned before the expiration  
of the warranty period, Winegard Company will (at its option) either repair or replace the product.  
This Limited Warranty does not apply if the product has been damaged, deteriorates,  
malfunctions or fails from: improper installation, misuse, abuse, neglect, accident, tampering,  
modification of the product as originally manufactured by Winegard in any manner whatsoever,  
removing or defacing any serial number, usage not in accordance with product instructions or  
acts of nature such as damage caused by wind, lightning, ice or corrosive environments such as  
salt spray and acid rain.  
RETURN AUTHORIZATION POLICY  
A Return Material Authorization (RMA) is required prior to returning any product to Winegard  
Company or Winegard Warranty Services under this warranty policy. Please call our Technical  
Services Department at 800-788-4417 or send an e-mail to [email protected] to obtain  
the RMA number. Please furnish the date of purchase when requesting an RMA number.  
Enclose the product in a prepaid package and write the RMA number in large, clear letters on the  
outside of the package. To avoid confusion or misunderstanding, a shipment(s) without an RMA  
number(s) or an unauthorized return(s) will be refused and returned to Customer freight collect.  
WINEGARD COMPANY DOES NOT ASSUME ANY LIABILITIES FOR ANY OTHER  
WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.  
Ver. 1.5  
4/21/2009  
- 11 -  
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING  
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE  
LIMITED TO THE TWO YEAR PERIOD OF THIS WARRANTY.  
In states that do not allow limitations on implied warranties, or the exclusion of limitation of  
incidental or consequential damages, the above limitations or exclusions do not apply.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of  
limitation of incidental or consequential damages, so the above limitations or exclusions may not  
apply to you.  
This warranty gives Customer specific legal rights. Customer may also have other rights that  
may vary from state to state.  
For Winegard TravelNet Internet and Phone Models  
(TN-2301, TN-2303, TN-2305, TN-2307)  
WINEGARD MOBILE PRODUCTS LIMITED WARRANTY  
(1 YEAR PARTS)  
Winegard Company warrants this product against defects in materials or workmanship for a  
period of one (1) year from the date of original purchase. No warranty claim will be honored  
unless at the time the claim is made, Customer presents proof of purchase to an authorized  
Winegard dealer (to locate the nearest authorized Winegard dealer, contact Winegard Company,  
3000 Kirkwood Street, Burlington, Iowa 52601, Telephone 800-288-8094 or visit  
Winegard product to verify the product is under warranty. If the date of purchase cannot be  
verified, the warranty period shall be considered to begin thirty (30) days after the date of  
manufacture.  
If a defect in material or workmanship is discovered, Customer may take the product to an  
authorized Winegard dealer for service. Customer must provide proof of purchase to verify the  
product is under warranty.  
Alternatively, Customer may ship the product prepaid to Winegard Technical Services (located  
at 3111 Kirkwood Street, Burlington, Iowa 52601, Telephone 800-788-4417). Customer must  
return the product along with a brief description of the problem and provide Winegard Technical  
Services with Customer’s name, address, and phone number. Customer must also provide proof  
of purchase to verify the product is under warranty. If the product is returned before the expiration  
of the warranty period, Winegard Company will (at its option) either repair or replace the product.  
This Limited Warranty does not apply if the product has been damaged, deteriorates,  
malfunctions or fails from: improper installation, misuse, abuse, neglect, accident, tampering,  
modification of the product as originally manufactured by Winegard in any manner whatsoever,  
Ver. 1.5  
4/21/2009  
- 12 -  
removing or defacing any serial number, usage not in accordance with product instructions or  
acts of nature such as damage caused by wind, lightning, ice or corrosive environments such as  
salt spray and acid rain.  
RETURN AUTHORIZATION POLICY  
A Return Material Authorization (RMA) is required prior to returning any product to Winegard  
Company or Winegard Warranty Services under this warranty policy. Please call our Technical  
Services Department at 800-788-4417 or send an e-mail to [email protected] to obtain  
the RMA number. Please furnish the date of purchase when requesting an RMA number.  
Enclose the product in a prepaid package and write the RMA number in large, clear letters on the  
outside of the package. To avoid confusion or misunderstanding, a shipment(s) without an RMA  
number(s) or an unauthorized return(s) will be refused and returned to Customer freight collect.  
WINEGARD COMPANY DOES NOT ASSUME ANY LIABILITIES FOR ANY OTHER  
WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.  
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING  
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE  
LIMITED TO THE ONE YEAR PERIOD OF THIS WARRANTY.  
In states that do not allow limitations on implied warranties, or the exclusion of limitation of  
incidental or consequential damages, the above limitations or exclusions do not apply.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of  
limitation of incidental or consequential damages, so the above limitations or exclusions may not  
apply to you.  
This warranty gives Customer specific legal rights. Customer may also have other rights that  
may vary from state to state.  
Ver. 1.5  
4/21/2009  
- 13 -  

Sprint Nextel Cell Phone Hydro Edge User Manual
Sony MHC FR10 User Manual
Sony Ericsson T65 User Manual
Siemens CX65 User Manual
Seagate Momentus ST9402116SB User Manual
Seagate GoFlex STBC3000101 User Manual
Seagate Constellation ST3000NM0043 User Manual
Seagate BARRACUDA ST3120815AS User Manual
Seagate BARRACUDA ATA FAMILY ST313620A User Manual
Philips CD 634 User Manual